Reciprocating feeder

Application of reciprocating feeder:

K-type reciprocating feeder used for coal or other abrasive, viscous small loose granular materials feeding, storage bin or material pit continuous uniform material unloading fell on the transport equipment or other screening devices.

Reciprocating feeder working principle and structure:

K-type reciprocating coal feeder has rack, backplane (chute), transmission platform, funnel, gates, roller and other composition. When the motor is activated by a flexible coupling, reducer, crank linkage drag the dump material 5 floor in a straight line on the roller reciprocating motion, the coal evenly unloaded to other devices.

The machine can be equipped as needed with the funnel, without the funnel in two forms. Coal feeder has two structural forms:

1. Take regulation gate.

2. With no adjustable gate, its back plane journey to achieve the ability to feed.

Reciprocating feeder main features:

1. Reliable, long life, light weight, small size, easy maintenance

2. Simple structure, reliable operation, adjust the ease of installation; closed frame structure, greatly improving the chassis stiffness.

3. Loading the finite rectangular fluid coupling, and full load start, overload protection.

4. The maximum feeding capacity of up to 1200t/h (coal), is currently the largest reciprocating feeder.

5. Using the advanced plane secondary enveloping toroidal mule rod reducer design, carrying capacity, and high transmission efficiency.

6. Side of the liner, the oblique liner and floor left seam adjustable, can more accurately control the left seam size, greatly reducing the leakage of material.

7. The drives are arranged symmetrically, and dual-putt, make the whole love of the force balance, smooth transmission, and eliminate the phenomenon of the bottom plate back and forth when the torsion pendulum.

8. Have been enacted to the ribs, floor, and three long roller bearings, to ensure the back plane itself stiffness, eliminating the shortcomings of existing reciprocating bending to the feeder floor.

9.The liner by a small piece of wear resistant steel plate makes up, not only light and easy replacement, and can be targeted according to the actual wear, to replace the worn lining plate, allowing the material to reasonable use, reduce maintenance costs.