Feeding machine

Feeder Description:

Feeder, also known as the feeder, I produced the GZD Series Vibrating Feeder is designed for coarse crushing and screening, even in the crushing machine is designed to transport bulk materials, developed a new type of vibration to feeder. Double eccentric shaft vibration exciter structural characteristics, to ensure that equipment can withstand the tremendous impact of information down, feeding ability. In the production process can be massive, granular materials from storage silos in uniform, regular, continuous feeding device into the subject, thus impeding the feeding device into the inequality caused by the accident, extended equipment life. Feeder can be divided into grid structure, steel structure, steel structure for the aggregate production of feeder lines, all of the material in the crusher evenly sprinkle the structure of the material; investigation, the feeder can be rough screening, in preparation system more economical, in the crushing and screening equipment is essential. It is widely used in metallurgy, coal mining, mineral processing, building materials, chemicals, abrasive crushing and screening equipment industry.

Feeder works:

Vibration of the vibration source, the eccentric shaft and the feed slot exciter excitation by two (active and passive) and the gear by the motor drive shaft axis through v belt, then take the gear shaft axis of rotation passive, active and passive counter-rotating shaft at the same time, tank vibration, the steady stream of material to achieve the purpose of the transport material.

Feeder features:

GZD Series Vibrating Feeder simple structure, uniform feeding, continuous adjustable exciting force; change the subject and control traffic, easy to operate, eccentric as the excitation source, low noise, low power consumption, regulation characteristics, there is no red cloth material phenomenon; use of a closed body vibration, in order to effectively prevent the dust pollution stable, reliable, long life; adjustable vibration force, and control fluid may be changed, easy adjustment, stability, vibration motor as vibration source, low noise , power consumption, adjusting performance, not the phenomenon of red cloth. Feeder structure is simple, reliable, easy installation, adjustment, small size, light weight, easy to maintain, the body when using closed structure in order to effectively prevent dust pollution.

GZD Series Vibrating Feeder simple structure, easy operation, no profit-oriented, low power consumption, or even to adapt to the amount of ore, it has been widely used. Typically used for bulk materials. According to the equipment performance requirements, structure, materials should be used to reduce the pressure tank, bunker port of discharge should not exceed a quarter of the effective width of the flow control, the material in 6-18m / min. Food supply large amounts of data, the bottom discharge hopper in the bar should be set high enough, does not affect the mining board; the performance of the feeder, stop the Mining Board is not fixed in the slot. In order to successfully discharge hopper, silo wall design steeped 55 - 65 degrees is best.